submersible copper winding wire

submersible copper winding wire Insulation: PP, PE, XLPE, FE application: submersible motor size: 0.4-6.0mm solid or strande

submersible copper winding wire

Submersible pumps are wildly used in farm irrigation, mine drainage, mineral petroleum, terrestrial heat heating, no-tower water supply, particular fields of industrial, agriculture and daily life. Submersible motor, the motive force part of the submersible pump, are used as wet motors in fluids which falls into clear water, hot water, acidic, alkali, salt fluid, oil or mixed liquid. The cooling of winding wire for submersible pump motor can be fall into intra-extra liquid convection cooling, mechanical seal or sealing element with clear water or oil inside, thus the wires used in submersible motor windings require high-quality insulation that is completely impervious to liquids, and ensure trouble-free operation and long motor life under particular operating conditions of different liquid erosion, high temperature, high voltage. Our wires are specially designed to meet the requirements of this application. The wires are made of single conductor or multi-conductor with special plastic insulation and jacket. We have following standard wire sizes, other special purpose or requirement can be made according to customers’ requests.

Polyethylene insulated nylon jacket water resistant winding wire

this product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PE+PA wire

Features:

1. PE+PA wire rated AC voltage U./U is 450/750V

2. PE+PA wire is applied to long-time working in water, PH value 6.5-8.5

3. PE+PA wire long-time working temperature should be less than 70 degrees

4. The outstanding characteristic of PE+PA wire is oil-resisant and water-resistant

Nominal section (mm2): 0.28-3.4

Core number/norminal diameter(mm):1/0.60-19/1.50

Insulated nominal thickness(mm):0.35-0.75mm

Jacket nominal thickness(mm): 0.12-0.15

Winding wire max. Diameter(mm): 1.60-9.5

When the temp. 20 deg.C DC resistance (OM/m): 0.001465-0.06222

Max. Rated voltage: 450/750 V

Max. Working temperature: 125 deg. C

Max. Water pressure: 1.5 Mpa

pH value: 6.5-8.5

PP-insulation water resistance winding wire

This product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified PP wire.

Features;

1.  PP wire rated AC voltage U./U is 450/750V

2.  PP wire is applied to long-time work in water, PH value 6.5-8.5

3.  PP wire long-time working temperature should be less than 80 degree

4.  The outstanding characteristic of PP wire is relatively thin insulation.

Cross-linked polyethylene insulation and PA-sheathing water-resistance winding wire, simplified XLPE wire.

This product is applied to water-filled submersible pump motor of A.C rated voltage 600/1000V and the electronics working under similar conditions, simplified XLPE wire.

1.  XLPE wire rated AC voltage U./U is 600/1000V

2.  XLPE wire is applied to long-time work in water, PH value 6.5-8.5

3.  XLPE wire long-time working temperature should be less than 90 degree

4.  The outstanding characteristic of XLPE wire is tolerant to warm water

Corona resistance compound insulation frequency conversion submersible motor specific winding wire

This product is applied to water-filled submersible pump motor of A.C rated voltage 450/750V and the electronics working under similar conditions, simplified YPPE wire.

1.  YPPE wire rated AC voltage U./U is 600/1000V

2.  YPPE wire is applied to long-time work in water, PH value 6.5-8.5

3.  YPPE wire long-time working temperature should be less than 80°C

4.  The outstanding characteristic of YPPE wire is Corona resistance.

Modified-Fluoroplastic insulation heat resistance submersible motor winding wire

This product is applied to water-filled high temperature submersible pump motor of A.C rated voltage 600/1000V and the electronics working under similar conditions, simplified FE wire.

1.  FE wire rated AC voltage U./U is 600/1000V

2.  FE wire is applied to long-time work in water, PH value 3-10

3.  FE wire long-time working temperature should be less than 150°C

4.  The outstanding characteristic of FE wire is tolerant to hot water

YF film sintered cross-linked PE insulation high voltage resistance submersible motor winding wire

This product is applied to water-filled high voltage submersible pump motor of A.C rated voltage 500/10000V and the electronics working under similar conditions, simplified YFPE wire.

1.  YFPE wire rated AC voltage U./U is 500/10000V

2.  YFPE wire is applied to long-time work in water, PH value 6.5-8.5

3.  YFPE wire long-time working temperature should be less than 80°C

4.  The outstanding characteristic of YFPE wire is relative thin insulation and resistant to high voltage

YF film sintered Modified-Fluoroplastic insulation high temperature and voltage resistance submersible winding wire

This product is applied to water-filled high temperature and high voltage submersible pump motor of A.C rated voltage 500/10000V and the electronics working under similar conditions, simplified YFFE wire.

1.  YFPE wire rated AC voltage U./U is 500/10000V

2.  YFPE wire is applied to long-time work in water, PH value 4-10

3.  YFPE wire long-time working temperature should be less than 150°C

4.  The outstanding characteristic of YFFE wire is high-temperature resistant, high-voltage resistant and corrosion resistant.

Polyimide-F46 compound film wrapped sintered copper wire

This product is applied to submersible oil motor whose rating below H grade or motors working under similar conditions, also applied to wrapped wire for insulation core of submersible cable, simplified MYF wire.

1.  MYF wire rated AC voltage U./U is 4000/10000V

2.  MYF wire is applied to long-time work in oil,  pressure below 20mpa.

3.  MYF wire long-time working temperature should be less than 200°C

submersible copper winding wire